Installation method and precautions of high temperature flexural testing machine

The flexural strength of inorganic non-metallic materials such as refractory materials, ceramics, and concrete under high temperature conditions is an important indicator for evaluating their comprehensive performance. Therefore, the high-temperature flexural tester, as an instrument and equipment specifically used to test the flexural properties of these materials under high temperature, has received much attention in related fields. Whether the high-temperature flexural tester can perform its due test accuracy depends largely on whether it is installed in place. Next, Hutt Xiaobian will introduce the installation method and precautions of the high-temperature flexural tester.

Installation method of high-temperature flexural tester

1. Choose a suitable installation site

First, you need to carefully take the high-temperature flexural tester out of the packaging box, and comprehensively check whether the equipment body and all accessories are complete and intact, and whether there is any damage caused by the transportation process. Once any problems are found, contact the supplier in time for processing. The installation site should be well ventilated, away from adverse environments such as moisture and dust, the ground should be flat and solid, and the load-bearing capacity should be sufficient, and sufficient operating space should be reserved. At the same time, it is necessary to ensure that the site has a stable three-phase industrial power supply.

2. Level the support base and install the high-temperature resistance furnace

Correct and level the support base of the equipment according to the standard horizontal line to keep it level with the actual ground. This is a prerequisite for ensuring the accuracy of subsequent high-temperature tests. According to the instructions, install the main body, insulation layer and heating elements of the high-temperature resistance furnace in place in sequence. At the same time, pay attention to the connection sequence and position between different components.

3. Install the loading system and connect the control and auxiliary systems

Connect the loading system such as hydraulic or pneumatic loading device to the main machine, and complete the assembly and fixation of each component according to the instructions. The installation position and angle of the loading system must be accurate. Connect the temperature control system, data acquisition and analysis and processing system to the main machine correctly as required, and perform necessary debugging and calibration. Connect the required cooling water, compressed air or inert gas pipelines to the high-temperature resistance furnace to ensure that the equipment can work normally under high temperature conditions.

4. Test run of the whole machine

After all installation and assembly are ready, test run the whole machine without adding samples to check whether all systems are coordinated, and perform troubleshooting and component adjustments. Carefully participate in the installation teaching and operation training provided by the manufacturer to fully master the use of the high temperature flexural test machine.

Precautions for the installation of high temperature flexural test machine

1. Operators must strictly abide by various safety regulations, wear necessary labor protection supplies, and ensure personal safety. When moving equipment, sufficient manpower and tools must be prepared in advance, and attention must be paid to prevent collision and falling of equipment and components.

2. Read the instructions carefully, proceed step by step, and do not adjust or omit any steps at will. The connections between different components and systems must be accurate in position, correct in sequence, firm and reliable.

3. Pay attention to the reasonable arrangement of lines and pipelines to avoid entanglement and uneven force. When debugging components, the parameters must be set strictly in accordance with the specifications, and no blind attempts should be made.

4. Keep a record of the installation of the whole machine, including component numbers, positions, connection sequences, etc., for subsequent maintenance. If you encounter any difficult problems during the installation process, contact the manufacturer's technical staff in time to avoid unnecessary losses.

In short, whether the installation of the high temperature flexural test machine is reasonable is particularly important for the performance of the equipment. Only by strictly following the specifications and carrying out the installation operations in each link in an orderly manner can we ensure the safe and smooth commissioning of the equipment and provide solid hardware guarantee for the high-temperature flexural strength testing of materials.